Hiking boots – Care and maintenance of your most important piece of hiking equipment

Hiking boots can last a lifetime if they are well maintained. This article will show you how to properly care for your hiking boots. From breaking them in to getting them resoled.

This article will cover five key points for proper care and maintenance.

1. You can break them in.

2. Waterproofing.

3. General maintenance and cleaning.

4. Resoling.

5. It is important to know when someone has had it.

Breaking in your Hiking Boots

Your hiking boots should be broken in to make them more comfortable for your feet. You must make sure they are flexible in the areas where your ankles and feet bend. Walking in them is the best way to achieve this. You should break in your hiking boots by taking short walks so that you don’t get blisters and a stiff pair of hiking shoes.

Even though hiking shoes and day-hiking boots may not require any break-in at all, you should still try it. Although very heavy hiking boots may not break in, wearing them will cause your feet to become more rigid in those areas.

You should wear your hiking boots only for short periods. You can wear them all around the house: on your morning walks, in your commute to work, and at work, if you don’t have to walk as much and your dress code allows. They can be worn on short hikes.

After the boots have been properly broken in, you will be able to walk comfortably in them. You can then take the boots on a serious hike.

It is possible to leave your hiking boots out in the elements, soak them, and then wear them until they dry. There are also other methods that can be used to break in your boots. It’s not a good idea, even though it sounds bad. They will last longer if you gently break them in.

Waterproofing Your Hiking Boots

While most hiking boots come pre-waterproof when you purchase them, you will still need to waterproof them. You can find the recommendation of the manufacturer on the boot’s packaging or on the company’s Web site.

Different materials require different types of waterproofing. A wax-based waterproofing compound is required for leather, regardless of whether it is full grain or split. This is the exact same thing as shoe polish. Nylon blends require a silicone-based waterproofing spray.

You will need to use both types. Hiking boots often combine leather and fabric. The silicone-based sprays can cause damage to leather hiking boots’ glued seams. For such dual-material hiking boots, spray the silicone-based waterproofing on fabric panels while protecting the leather. Then spray the wax-based waterproofing onto the leather panels and seams.

You can use wax-based waterproofing spray on full grain leather boots or traditional shoe polish if you have them. You can apply shoe polish extra thickly to the seams and then work it into the stitching.

After each hike and before you use them for the first time, thoroughly clean and waterproof your boots. Even if your hiking shoes are not used often, they may only need to be waterproofed once a year. Reapply waterproofing if you notice new wear marks or scuffs after a hike.

Cleaning and general maintenance of your hiking boots

After each day of hiking, clean your boots to remove any mud or dust. After each hike, take a break to clean your boots. If you need to clean your boots while camping or hiking, simply kick your boots against a rock and bang them together.

The mud will soak into your boots and leach the waterproofing. This slows down the leather and is not good for nylon.

After you return home or after a long backpacking trip, clean your boots with a damp cloth. Make sure you remove all foreign material so that the waterproofing chemicals do not get affected. Also, it is possible to inspect the boots for any damage.

Cut any dangling threads if a seam is unraveling. The seam will unravel much quicker if the dangling thread gets caught on anything. You can take the boots to a cobbler depending on how bad the damage is and how much they cost. Or you can simply use extra shoe polish to keep the seam waterproof and hold it in place.

Dry your boots slowly if they have become wet. Rapid drying can cause leather to shrink and pull away from fabric and rubber soles. You can pack the damp boots with wadded newspapers and then replace them every few hours until they dry completely.

A pair of shoes trees can help keep your boots in shape between hikes. This will make your next hike more comfortable.

Resoling your Hiking Boots

You can replace the soles of your backpacking boots if they aren’t in good condition. The cost of this service can range from $40.00 to $80.00.

Resoling hiking shoes and day-hiking boots is not worth it. The uppers are likely to wear out just as quickly as the soles. However, even if they appear in good condition, it doesn’t make financial sense.

To resole your boots, find a skilled cobbler in your area. Although there are many services available online that can do this, shipping costs will add significantly to the total cost. All such services are guaranteed to work. Search the Internet for “boot replacement” if you are unsure of a reliable cobbler to take care of your hiking boots.

Your hiking boots will feel like new after they have been resoled. This means that you will need to break them in again.

How to Wear Your Hiking Boots

You should inspect your hiking boots and determine if they are worn.

The tread is the most visible wear point. Sometimes, the tread may be visible and worn to the point where the cracks between knobs of tread aren’t deep enough for traction. You will find two layers in some hiking boots. The softer part wears away and you walk on the harder inner layer that doesn’t provide good traction on hard rocks.

The scree collar’s interior is another common area of wear. This is the padding that surrounds the top and keeps pebbles from chaffing your Achilles tendon. Your hiking boots should be replaced immediately if the lining is worn or the foam padding is exposed.

Make sure to inspect the lining of your hiking boots. You will often find a hole under your toe or heel. This can be prevented by using removable insoles, but you should replace them regularly. This will cause blisters.

Some hiking boots’ uppers may begin to wear at their seams. The seams may be separating very quickly due to friction between the panels, which makes the fabric more flexible, which allows for more movement.


Leave a Reply

Your email address will not be published.